Strannic
19.04.2006, 00:30
Приблуда позволяет выводить на второй моник приборы с пита и TWS
Пользуем, смотрим, высказываем мнения. С моими мониками подобные софтины почему то косячат.
http://www.blackoperations.com/FalconGauges1.2.49b.zip
Исходная ветка http://forums.frugalsworld.com/vbb/showthread.php?t=102849
Version 1.2.49b
IMPORTANT:
You must use this on a seconday monitor as it's also a 3D accelerated program and will conflict with Falcon on the same machine.
It will function with Falcon as long as you are supplying a copy of the Shared Memory file to the machine it's running on. Eagle's F4 data server works well. Falcon-A is yet to be tested.
USING THE PROGRAM:
Each gauge has a nubmer associated with it for moving/scaling/orienting it:
RPM Gauge..... 1
NOZ Gauge..... 2
ASI Gauge..... 3
OIL Gauge..... 4
EPU Gauge..... 5
FTIT Gauge.... 6
DED........... 7
FuelFlow...... 8
DED Text...... 9
AOA Gauge..... P
VVI Gauge..... O (As in Oscar)
Altimeter Gauge..... I
ADI Gauge..... U
HSI Gauge..... Y
RWR........... L
Fuel Gauge.... J
AutoStart Off... K (Use this once the program starts to turn off AutoStart, then restart to get the preferences to come back up, make your changes and select AutoStart again if desired. The program will bypass the preferences in AutoStart Mode.)
NightVision..... N
ASI INdexer..... G,H (Aligns for speed reference marker)
If you press and hold the gauge access number plus the following commands you can change the gauges position, scale and orientation:
Move Gauge Up: W
Move Gauge Down: S
Move Gauge Left: A
Move Gauge Right: D
Zoom Gauge In: E
Zoom Gauge Out: Q
Rotate Gauge: R (0 degrees), T (90 deg.), G (180 deg.), and F (270 deg.)
Exit the Program: X
Changes:
Version 1.2.49b..........
Added Caution Panel. Added ability to change the window origin using WINX and WINY in config file. Use with EXTREME Caution. If you don't know what this one is for, dont mess with it in the config file, default is "0" (zero) for each one. These adjustments for WINX and WINY are for the starting position of the window. This affects both full screen and windowed modes. This is for making small adjusts if needed, and was put in specifically for Strings pit.
Version 1.2.49..........
Added capability to track up to 40 targets on the RWR. Adjusted the Lethality calculations to be more accurate. Work continues on the RWR. I also got rid of the window title and big frame up stairs. Now the small border frames are dragable in order to enlarge the window. You can also press "ALT" and then the "SPACEBAR" key once in order to get the close, move, size menu going, you have to use the keyboard to move and size the window, but it works like a champ, the menu will be invisible once your press the "ALT" key until you press the "SPACEBAR" key to make it appear.
Version 1.2.48c..........
Added 34 more symbols to the RWR for a total of 92 working symbols. Also added custom resolution button. Look at the first two lines in the config file and you'll see that you can enter a custom resolution there. It's a floating point number so be sure to add a ".0" behind your entry, ie 1024.0. You can get crazy here, so be sure you know what you're doing before editing the numbers in the config file. Work continues on RWR.
Version 1.2.48b..........
Adjusted NOZ, FTIT, and OIL Gauges. Work continues on RWR.
Version 1.2.48..........
Added Fuel Gauge. Work continues on RWR.
Version 1.2.47..........
Started adding RWR and symbols.
Version 1.2.46..........
Final touches to HSI.
Version 1.2.45h..........
Added ability to move ASI indexer using G and H keys. Completely reworked VVI and MAch. Changes made to CDI, needs testing. Only changed way it moved, not yet implemented bug workaround code. that's next dude. Changed the intro/settings screen banner. Changes made to NoZ and OIL gauge faces.
Version 1.2.45(Major)..........
Completely recoded the Display systems. Gauges no longer have calibration or rotation problems, they also no longer jump around the screen when you rotate them. So rotate you hearts out now. lol. Added ADI gauge. Added HSI Gauge.
Version 1.2.42..........
Minor Changes really. Added the Flags to the AOA, VVI, and Altimeter. Now when you loose generators or are rampstarting, the gauges flag properly. Also adjusted sensitivity when positioning the gauges. I dropped in by half the speed to allow for precise positioning.
Version 1.2.41..........
changed the Math code to allow for smoother roll of FuelFlow Drums.
Added the Altimeter. Key "I" Controls it for adjustment(see above).
Version 1.2.40..........
Changed the FuelFlow gauge. Added the 5-3D Dials for number now that rotate like the real gauge, instead of a text display (which was lame lol.) Also repainted the VVI numbers on the tape for easier reading. Recalibrated the AOA.
Version 1.2.39..........
Added VVI. Added controls to turn the dials in the AOA and VVI gauges to help with alignment when they are resized. "V" and "B" Keys do this.
Version 1.2.38..........
Added AOA Gauge. Added the saving of all Preferences. Added in the Link AutoStart System. With Bypass Prefs/AutoStart checked the program will automatically launch bypassing the preferences. If you want to make a change in what gauges are shown, or bezels/nobezels, screensize etc...just press the "K" key while the program is running and it will turn off the AutoStart Flag. Then restart the program, make changes, etc...
Version 1.2.37..........
Added NightVision. Now looks like you're looking at the gauges using NVG's.
Seperated the Fuelflow text from the gauge for easier alignment.
DED Text is on "9" and the FuelFlow Text is on "0" for manipulation.
Added 1600x600 resolution as well.
Version 1.2.36NView......
Added wide views for Nview.
Resolutions added are 1280x480, and 2048x768
Changed DED text handling to seperate from gauge to make lining up easier.
Version 1.2.36...........
Memory Leak Fixed!!
Added Fuel Flow with temp Font.
Will replace font for it with something more realistic soon.
Version 1.2.35...........
Finished DED (for now) Works great!!
Version 1.2.34.............
Added 1/2 working DED.
Version 1.2.33..............
Added FTIT Gauge.
Version 1.2.32...............
Have added RPM, NOZ, ASI, OIL, and EPU Gauges.
Version 1.0.2................
Gauges now remember position,scale, and orientation
You can select to have the bezel shown or not shown.
Added Gauge Rotation. Note: You must rotate gauge first before moving it.
Version 1.0.1................
Added ability to move gauge on screen.
Пользуем, смотрим, высказываем мнения. С моими мониками подобные софтины почему то косячат.
http://www.blackoperations.com/FalconGauges1.2.49b.zip
Исходная ветка http://forums.frugalsworld.com/vbb/showthread.php?t=102849
Version 1.2.49b
IMPORTANT:
You must use this on a seconday monitor as it's also a 3D accelerated program and will conflict with Falcon on the same machine.
It will function with Falcon as long as you are supplying a copy of the Shared Memory file to the machine it's running on. Eagle's F4 data server works well. Falcon-A is yet to be tested.
USING THE PROGRAM:
Each gauge has a nubmer associated with it for moving/scaling/orienting it:
RPM Gauge..... 1
NOZ Gauge..... 2
ASI Gauge..... 3
OIL Gauge..... 4
EPU Gauge..... 5
FTIT Gauge.... 6
DED........... 7
FuelFlow...... 8
DED Text...... 9
AOA Gauge..... P
VVI Gauge..... O (As in Oscar)
Altimeter Gauge..... I
ADI Gauge..... U
HSI Gauge..... Y
RWR........... L
Fuel Gauge.... J
AutoStart Off... K (Use this once the program starts to turn off AutoStart, then restart to get the preferences to come back up, make your changes and select AutoStart again if desired. The program will bypass the preferences in AutoStart Mode.)
NightVision..... N
ASI INdexer..... G,H (Aligns for speed reference marker)
If you press and hold the gauge access number plus the following commands you can change the gauges position, scale and orientation:
Move Gauge Up: W
Move Gauge Down: S
Move Gauge Left: A
Move Gauge Right: D
Zoom Gauge In: E
Zoom Gauge Out: Q
Rotate Gauge: R (0 degrees), T (90 deg.), G (180 deg.), and F (270 deg.)
Exit the Program: X
Changes:
Version 1.2.49b..........
Added Caution Panel. Added ability to change the window origin using WINX and WINY in config file. Use with EXTREME Caution. If you don't know what this one is for, dont mess with it in the config file, default is "0" (zero) for each one. These adjustments for WINX and WINY are for the starting position of the window. This affects both full screen and windowed modes. This is for making small adjusts if needed, and was put in specifically for Strings pit.
Version 1.2.49..........
Added capability to track up to 40 targets on the RWR. Adjusted the Lethality calculations to be more accurate. Work continues on the RWR. I also got rid of the window title and big frame up stairs. Now the small border frames are dragable in order to enlarge the window. You can also press "ALT" and then the "SPACEBAR" key once in order to get the close, move, size menu going, you have to use the keyboard to move and size the window, but it works like a champ, the menu will be invisible once your press the "ALT" key until you press the "SPACEBAR" key to make it appear.
Version 1.2.48c..........
Added 34 more symbols to the RWR for a total of 92 working symbols. Also added custom resolution button. Look at the first two lines in the config file and you'll see that you can enter a custom resolution there. It's a floating point number so be sure to add a ".0" behind your entry, ie 1024.0. You can get crazy here, so be sure you know what you're doing before editing the numbers in the config file. Work continues on RWR.
Version 1.2.48b..........
Adjusted NOZ, FTIT, and OIL Gauges. Work continues on RWR.
Version 1.2.48..........
Added Fuel Gauge. Work continues on RWR.
Version 1.2.47..........
Started adding RWR and symbols.
Version 1.2.46..........
Final touches to HSI.
Version 1.2.45h..........
Added ability to move ASI indexer using G and H keys. Completely reworked VVI and MAch. Changes made to CDI, needs testing. Only changed way it moved, not yet implemented bug workaround code. that's next dude. Changed the intro/settings screen banner. Changes made to NoZ and OIL gauge faces.
Version 1.2.45(Major)..........
Completely recoded the Display systems. Gauges no longer have calibration or rotation problems, they also no longer jump around the screen when you rotate them. So rotate you hearts out now. lol. Added ADI gauge. Added HSI Gauge.
Version 1.2.42..........
Minor Changes really. Added the Flags to the AOA, VVI, and Altimeter. Now when you loose generators or are rampstarting, the gauges flag properly. Also adjusted sensitivity when positioning the gauges. I dropped in by half the speed to allow for precise positioning.
Version 1.2.41..........
changed the Math code to allow for smoother roll of FuelFlow Drums.
Added the Altimeter. Key "I" Controls it for adjustment(see above).
Version 1.2.40..........
Changed the FuelFlow gauge. Added the 5-3D Dials for number now that rotate like the real gauge, instead of a text display (which was lame lol.) Also repainted the VVI numbers on the tape for easier reading. Recalibrated the AOA.
Version 1.2.39..........
Added VVI. Added controls to turn the dials in the AOA and VVI gauges to help with alignment when they are resized. "V" and "B" Keys do this.
Version 1.2.38..........
Added AOA Gauge. Added the saving of all Preferences. Added in the Link AutoStart System. With Bypass Prefs/AutoStart checked the program will automatically launch bypassing the preferences. If you want to make a change in what gauges are shown, or bezels/nobezels, screensize etc...just press the "K" key while the program is running and it will turn off the AutoStart Flag. Then restart the program, make changes, etc...
Version 1.2.37..........
Added NightVision. Now looks like you're looking at the gauges using NVG's.
Seperated the Fuelflow text from the gauge for easier alignment.
DED Text is on "9" and the FuelFlow Text is on "0" for manipulation.
Added 1600x600 resolution as well.
Version 1.2.36NView......
Added wide views for Nview.
Resolutions added are 1280x480, and 2048x768
Changed DED text handling to seperate from gauge to make lining up easier.
Version 1.2.36...........
Memory Leak Fixed!!
Added Fuel Flow with temp Font.
Will replace font for it with something more realistic soon.
Version 1.2.35...........
Finished DED (for now) Works great!!
Version 1.2.34.............
Added 1/2 working DED.
Version 1.2.33..............
Added FTIT Gauge.
Version 1.2.32...............
Have added RPM, NOZ, ASI, OIL, and EPU Gauges.
Version 1.0.2................
Gauges now remember position,scale, and orientation
You can select to have the bezel shown or not shown.
Added Gauge Rotation. Note: You must rotate gauge first before moving it.
Version 1.0.1................
Added ability to move gauge on screen.