The EEPROM Access Registers are accessible in the I/O space.
The write access time for the EEPROM is given in Table 6-3. A self-timing function, however,
lets the user software detect when the next byte can be written. If the user code contains instructions that write the EEPROM, some precautions must be taken. In heavily filtered power
supplies, VCC is likely to rise or fall slowly on power-up/down. This causes the device for some
period of time to run at a voltage lower than specified as minimum for the clock frequency used.
See “Preventing EEPROM corruption” on page 29. for details on how to avoid problems in these
situations.