???
Математика на уровне МГУ

Показано с 1 по 25 из 176

Тема: Saitek Cyborg X деcятка

Комбинированный просмотр

Предыдущее сообщение Предыдущее сообщение   Следующее сообщение Следующее сообщение
  1. #1

    Ответ: Saitek Cyborg X деcятка

    Мне тут написали как сбросить калибровку для сабжа
    цитирую
    To recalibrate in Windows, first remove the USB plug for your controller
    from the PC.

    Press and hold the Windows key on your keyboard and then press the
    letter R. This will open the Run box. Type regedit and then click ok.

    The Registry Editor will have a list of folders on the left hand side.
    Go down into the following folders in order by clicking the + next to
    the folder name.

    +HKEY_LOCAL_MACHINE (CURRENT_USER if on Vista)
    +System
    +CurrentControlSet
    +Control
    +Media Properties
    +Private Properties
    +Direct Input

    Delete any folder inside the Direct Input folder that begins VID_06A3.

    Once deleted, close the editor, then plug the USB back into the original
    port. Move all the axes of the controller through their full range of
    movement four times.

    Now go to Control Panel > Game Controllers > Properties to check the
    axes on the test screen. If the issue persists then test the controller
    on another PC to see if the issue is replicated. If it is replicated
    then it is most likely a fault with the controller which will need to be
    replaced if it is still within warranty.

    Best Regards

  2. #2

    Ответ: Saitek Cyborg X деcятка

    И что это даст?

  3. #3
    Механик
    Регистрация
    18.04.2004
    Адрес
    Russian Federation
    Возраст
    42
    Сообщений
    623

    Re: Ответ: Saitek Cyborg X деcятка

    [/COLOR]
    Цитата Сообщение от Jameson Посмотреть сообщение
    Мне тут написали как сбросить калибровку для сабжа
    цитирую
    To recalibrate in Windows, first remove the USB plug for your controller
    from the PC.

    Press and hold the Windows key on your keyboard and then press the
    letter R. This will open the Run box. Type regedit and then click ok.

    The Registry Editor will have a list of folders on the left hand side.
    Go down into the following folders in order by clicking the + next to
    the folder name.

    +HKEY_LOCAL_MACHINE (CURRENT_USER if on Vista)
    +System
    +CurrentControlSet
    +Control
    +Media Properties
    +Private Properties
    +Direct Input

    Delete any folder inside the Direct Input folder that begins VID_06A3.

    Once deleted, close the editor, then plug the USB back into the original
    port. Move all the axes of the controller through their full range of
    movement four times.

    Now go to Control Panel > Game Controllers > Properties to check the
    axes on the test screen. If the issue persists then test the controller
    on another PC to see if the issue is replicated. If it is replicated
    then it is most likely a fault with the controller which will need to be
    replaced if it is still within warranty.

    Best Regards
    пасиба, работает

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •