РЛЭ G2 -подготовка к взлету.Цитата:

1)Close canopy.
2)Set stabilizer to "Tail-heavy".
3)Switch on power master switch(pull the knob on the starboard side behind the pilot's seat
4)Switch on automatic pitch control (on the starboard side in the cockpit near the foot pedal) and the master switch for the pitch adjustment system(on the primary electrical panel). Set the change-over switch underneath tthe throttle lever to "Manual"( Handverstellung)
Check that the blade pitch control works using the thumb switch on the throttle lever.Leave the airscrew pitch in the 12o'clock position.
Set the change-over switch to "Automatic" (Automatik ein). The airscrew indicator should move to 12:30 o'clock.If the blades move further, the battery voltage is too low.If you cannot reaplace the battery,the change-over switch
must be left on "Manual" at less than 1,900 RPM.

Процесс представить не сложно.15-20 минут?Ну-ну