TrackIR external view

external_trackir=0
external_trackir_dir=0 if TrackIR is active, let it control external view too (def=0). Invert the view direction of the external TIR (def=0)

Cannon tracking boresight

cannontrack=1 Cannon is tracking the pilot's view. Three settings are available: 0 = tracking off, 1 = tracking only when no acquisition system is turned off (Ctrl-NumDel), 2 = tracking only when IHADSS/HIDSS/HMS system is active.

TrackIR vector support

TIR_6DOF=0 Enables support for TrackIR vector in the hokum and comanche

Texture support

texture_colour=0
texture_filtering=0
mipmapping=0
dynamic_water=0

Set these values to 1 to enjoy high res mipmapped alpha blended custom made texture packs. When linear filtering is set to 1 the game reacts to the anisotropy setting of your graphics card. Dynamic_water simulates fllwing water but only with the correct texture packs.

Autosave

autosave=0

autosave=n: Autosave every n minutes or 0 for no autosave. Quicksave is also possible using Ctrl-Z.

и коротко резюмируя - СПИСОК НОВЫХ КЛАВИШ

Extra In-game commands

Designated target list

Alt-Num0
Ctrl-Num0

Allows you to select designated targets even outside the target filter (see designated target list mod above)

Enhanced inset view

Alt-F12

Inset view in the cockpit. Pressing 0 selects the target (default). Pressing keys 2-6 select the same views as corresponding padlock commands.

Field of view

7,8,9

Activates near, normal, wide field of view (FOV)

Ground stabilised FLIR (Comanche only)

Ctrl-S

Toggles ground stabilized FLIR on/off.

Mouse controlled view panning

Middle mouse
/ Ctrl-Del

Switches between mouselook for panning and fixed view (whre F1 and F2 work). Fixed view means that the mouse can be used for the FLIR.

Mouse controlled FLIR

Left-mouse
Right-mouse
Middle mouse/Ctrl-Del

When mouselook is off (msl=0), you can use mouse for FLIR panning. Additionally, when you press left mouse button you lock/unlock target, with right button you can select next target and with mouse wheel you control zoom level. It is also possible to switch mouselook on/off with ctrl-delete key combination or with a middle mouse button.

Cannon tracking

Ctrl-Num Del

Cannon is tracking the pilot's view. Three settings are available: 0 = tracking off, 1 = tracking only when no acquisition system is turned off (Ctrl-NumDel), 2 = tracking only when IHADSS/HIDSS/HMS system is active.

Mouse map control

Mouse wheel

The map view may be zoomed in/out with a mouse wheel. It is also possible to pan the map when the right button is pressed (it needs some improvement still). When the small 3d preview window is selected, mouse movements and wheel with ctrl pressed will pan/zoom the camera.

Satellite view

Ctrl-F9

Pressing Ctrl-F9 gives you satellite view, both for your own gunship and for other groups. Moreover, pressing Space on the map view when a site is selected switches the view to satellite camera. When a group is selected you can zoom satellite view with default controls, for keysites it is also possible to pan view. Note that at the moment for debugging purposes the level of interference is selected randomly each time the satellite view is select ed. In the future it will be linked to weather/daytime.

Special TSD render

Ctrl-D
Alt-D

Ctrl-D (as in Declutter) cycles through the TSD render options: old TSD screen, the terrain map with/without contours, shaded relief with/without contours. Alt-D cycles through the elevation colour palettes (0-2).

Wideview editing

\
Crtl-\
numpad keys 1-9

Switch between normal view and wideview by pressing "\", toggle wideview edit by pressing "Ctrl-\" and then the numpad keys to change the setting. The values are stored in eech.ini. Note that on non-English keyboards a different key may be needed (instead of "\"). Numpad keys can be used to shift the viewpoint: num-8 and num-2 for the vertical, num-4 and num-6 for the distance, num-1 and num-3 for the x direction and num-7 and num-9 for the pilot's head pitch.

Note: when you fly the Apache and you don't like the heavy black bars in front of your face, you can switch to wideview and make it partly disappear by pressing: first Ctrl-\, then num-5 to set X=-8 and num-1 and num-3 to fine tune. The bar starts to disappear if X reaches a value of about -8.200.

Campaign commander

Left and right Mouse

Just select the enemy target and press left mouse button: a new task is created. When you press right mouse button over a task, it is immediately terminated. Works when option camcom=1 in the eech.ini file.

HUD

Alt-F1
Shift-K

Change the HUD size from 70% to 140% and background shading colour.

PNVS

Ctrl-N

Change brightness of night view, 3 settings.

Quicksave

Ctrl-Z

save the game anytime


оригинал тут - http://home.planet.nl/~jette073/gotcha/162w2readme.html